FDA DEVICE FACTS
SMR 3-Pegs Glenoids
Lima Corporate S.P.A.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
The SMR Anatomic Shoulder System is indicated for partial or total, primary or revision shoulder joint replacement in patients suffering from disability due to: Non-inflammatory degenerative joint disease including osteoarthritis and avascular necrosis; Inflammatory degenerative joint disease such as rheumatoid arthritis; Treatment of acute fractures of the humeral head that cannot be treated with other fracture fixation methods; Revision of a failed primary implant; Cuff tear arthropathy (CTA Heads only). The SMR Reverse Shoulder System is indicated for primary, fracture or revision total shoulder replacement in a grossly rotator cuff deficient joint with severe arthropathy (disabled shoulder). The patient's joint must be anatomically and structurally suited to receive the selected implants and a functional deltoid muscle is necessary to use the device. The Modular SMR Shoulder System allows the assembly of components in various humeral and glenoid constructs. The constructs are intended for cemented and uncemented use as specified in the following table. In the Anatomic shoulder the humeral construct consists of the humeral stem, the humeral body, the adaptor taper and the humeral head. In the Reverse shoulder the humeral construct consists of the humeral stem, the reverse humeral body and the reverse liner. On the humeral side the fixation of the humeral stem determines if the construct is cemented or uncemented. The Anatomic glenoid construct consists of an all polyethylene glenoid or a metal back assembled with a liner while the Reverse glenoid construct consists of the metal back, the connector and the glenosphere. On the glenoid side, the fixation of the all polyethylene glenoid or the metal back determines if the construct is cemented or uncemented. System Components Material Use A R Cem Not Cem SMR Stems (Cemented, Cemented Revision) Ti6Al4V X SMR Stems (Cementless Finned, Cementless Revision) Ti6Al4V X SMR Humeral Bodies (Trauma, Finned) Ti6Al4V X X SMR Reverse Humeral Body Ti6Al4V X X Humeral Extension Ti6Al4V X X SMR Humeral Heads (Standard, CTA) CoCrMo X X SMR Adaptor Tapers (Neutral, Eccentric) Ti6Al4V X X SMR CTA Head Adaptor for Reverse Humeral Body Ti6Al4V X X SMR Glenospheres CoCrMo X SMR Connectors Ti6Al4V X Reverse Liners UHMWPE X X SMR Cemented Glenoids UHMWPE X SMR 3 Pegs Cemented Glenoids UHMWPE X SMR Metal Back Glenoids Ti6Al4V+PoroTi X* X* SMR TT Metal Back Baseplate Ti6Al4V X* X* SMR TT Metal Back Peg Ti6Al4V X X SMR Metal Back Liner UHMWPE X* X* * SMR Bone screws Ti6Al4V X Material Standards Ti6Al4V (ISO 5832-3 - ASTM F1472) - CoCrMo (ISO 5832-12 - ASTM F1537) – UHMWPE (ISO 5834-2 - ASTM F648) - PoroTi Titanium Coating (ASTM F1580) A= Anatomic / R=Reverse *NOTE : In the US, the SMR Metal Backed Glenoid/Liner construct, used as part of the SMR Anatomic Shoulder Replacement, is intended for use with bone cement and should be used without bone screws.
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。