FDA DEVICE FACTS
SterilContainer S System
Aesculap, Inc.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
The SterilContainer S System is a reusable sterilization container system (consisting of perforated bottoms and perforated lids with filter retention plates, and single use polypropylene filters) intended to be used to enclose another medical device that is to be sterilized by a healthcare provider. This container system has been validated with stainless steel and Teflon lumens, hinged, and knurled instruments. It is intended to allow sterilization of the enclosed device and also maintain sterility of the enclosed device until used. This container system is compatible for use with the TS03 Sterizone VP4 Low Temperature Sterilization System. The SterilContainer S System includes accessories such as silicone mats, baskets, trays, racks, eyepiece holders and sleeve holders. Table 1: Validated TSO3 Sterilizer Flexible Cycle Load Configurations Flexible endoscopes load accommodating three single channel flexible endoscopes, Load #1 (31.2 Ib) one per container: e Internal channel diameter of | mm and length of 850 mm. Semi-rigid and rigid channel devices load accommodating three double channel semi-rigid endoscopes, one per container, and one length of medical grade stainless steel tubing. 4 ib e Length of tubing: Load #2 (29.4 { } > Internal channel diameter of 1.0 mm and length of 500 mm. e Double channel semi-rigid endoscope > Internal channel diameters of 0.7 mm and 1.1 mm, and length of 500 mm Worst-case volume to surface perforation area ratio using a perforated container Load #3 (10.2 Ib) including two stacked baskets. Each basket was covered with a full length silicone mat. At least one inoculated medical device was added per level of the container. Worst-case volume to surface perforation area ratio using a perforated container Load #4 (25 Ib) with maximum weight of instrument, for a total mass of 25 Ib. At least three inoculated medical devices were added in the container. Heavy weight load composed of three perforated containers, with a total mass of 25 lb per container. The heavy validation load was prepared based on the Aesculap" Load #5 (75 Ib) SterilContainer™ S container lethality studies (PRO-169) and adapted to include a maximum weight in a single load. Table 2: TSO3 -Sterilizer Flexible Cycle Compatible SterilContainer S Container Systems Lid Bottom Description Total Loaded Container Weight (if container does not contain a flexible endoscope JM489 JM440 Full Size 90mm (4 %”) JM441 Full Size 120mm (5 %”) 25 Ibs for one container in the JM442 Full Size 135mm (6”) chamber JM444 Full Size 187mm (8”) JM789 JM740 % Size 90mm(4 %”) JM741 % Size 120mm (5 %”) JM742 % Size 135mm (6”) JM389 JM340 % Size 90mm (4 %”) JM341 % Size 120mm (5 %”) JM342 % Size 135mm (6”) *Loads containing a flexible endoscope or bronchoscope should follow Table 1 recommendations Table 3: TSO3 Sterilizer Cycle Compatible Accessories Accessories TSO3 Cycle Stainless Steel baskets, basket lids, and dividers Instrument Organization System (Silicone and Stainless Steel racks, Yes Y brackets, holders, and clamps) es Silicone mats Yes Stainless Steel racks, trays, holders, clamps, brackets, and platforms Yes
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。