RARA CRAFT DATABASE for FDA Medical Devices
510(k)K170429

FDA DEVICE FACTS

Tyvek Sterilization Pouches with Chevron Seal

Andersen Sterilizers, Inc.

FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。

DECISION DATEOctober 27, 2017PRODUCT CODEFRG

Indications for use

Tyvek Sterilization Pouches with Chevron Seal are intended to enclose medical devices that are to be sterilized in a single pouch configuration at a healthcare facility. They are used in the 12 hour sterilization cycle at 20-29°C in the Anprolene AN75 Ethylene Oxide Gas Sterilizer. Critical process parameters for the cycle are summarized in Table 1. Table 1. Critical sterilization cycle parameters in the Anprolene AN75 Ethylene Oxide Gas Sterilizer EO Amount Temperature Relative Humidity EO Exposure Time Total Cycle Time 17.6 g ± 5% 20-29°C 35-90% 12 hours 14 hours The product codes for Tyvek Sterilization Pouches are listed in Table 2. Table 2. Product codes for Tyvek Sterilization Pouches Product Type Self-Seal, Heat Seal, Tubing Product Codes TLP-030, TLP-031, TLP-033, TLP-058, TLP-059 The 12 hour cycle in the Anprolene AN75 Ethylene Oxide Gas Sterilizer has been validated to sterilize a load of up to 24 lbs of metal surgical instruments, 3 lbs of fabric, or 3.5 lbs of plastic devices (combined weight of pouched devices and tray). Sterility was maintained for at least 3 months after processing in an Anprolene AN75 sterilizer.

Tyvek Sterilization Pouches with Chevron Seal are intended to enclose medical devices that are to be sterilized in a single pouch configuration at a healthcare facility. They are used in the 12 hour sterilization cycle at 20-29°C in the Anprolene AN75 Ethylene Oxide Gas Sterilizer. Critical process parameters for the cycle are summarized in Table 5-1.

Table 5-1. Critical parameters for the 12 hour cycle in the Anprolene AN75 Ethylene Oxide Gas Sterilizer Ethylene Oxide Temperature Relative Humidity Ethylene Oxide Exposure Time Total Cycle Time 17.6 g ± 5% 20-29°C 35-90% 12 hours 14 hours

The product codes for Tyvek Sterilization Pouches are listed in Table 5-2.

Table 5-2. Product codes for Tyvek Sterilization Pouches Product Type Self-Seal, Heat Seal, Tubing Product Codes TLP-030, TLP-031, TLP-033, TLP-058, TLP-059

The 12 hour cycle in the Anprolene AN75 Ethylene Oxide Gas Sterilizer has been validated to sterilize a load of up to 24 lbs of metal surgical instruments, 3 lbs of fabric, or 3.5 lbs of plastic devices (combined weight of pouched devices and tray). Sterility was maintained for at least 3 months after processing in an Anprolene AN75 sterilizer.

See the full product information製品情報をすべて見るには

Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。

Start free 7-day access7日間無料で利用するLog inログイン

OFFICIAL FDA SOURCES

FDA Record and Public Document Status

Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。

Information reviewed:情報の確認日: August 28, 2026