RARA CRAFT DATABASE for FDA Medical Devices
510(k)K181933

FDA DEVICE FACTS

DePuy Synthes Sterilization Container System

Synthes (Usa) Products, LLC / Depuy Orthopaedics, Inc.

FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。

DECISION DATEMay 9, 2019PRODUCT CODEKCT

Indications for use

The DePuy Synthes Sterilization Container System is a device intended to be used to enclose other medical devices to be sterilized by healthcare facilities. It allows sterilization of the enclosed medical devices and maintains sterility of the devices until used for a maximum of 180 days. The containers are suitable for dynamic air removal (pre-vacuum) steam sterilization when used according to the instructions for use. Sterilization Parameters and Devices Recommended for Use with System Sterilization Parameters for the DePuy Synthes Sterilization Container Applicable to both Solid and Perforated Base Containers with Lifting Platforms Sterilization Method  Cycle Parameters  Total  System Weight Devices and Materials Validated for Use with DePuy Synthes Containers Dynamic Air Removal (Pre‐ Vacuum) Steam Exposure Temperature: 270°F (132°C) Pre‐Conditioning Pulses: 3 Exposure Time: 4 Minutes Minimum Dry Time Cycle: 30 Minutes Minimum Cool Time: 60 minutes (may vary according to load contents) Stacking Containers During Sterile Processing Not Permitted. Maximum 25 lbs. (Container plus contents) Orthopaedic Medical Devices including Lumen (Cannulated) Devices. Mated Surface Devices (Devices or Device Configurations with conjoined surfaces which meet, touch or unite). Instrument and implant Materials: Intrinsically stable metals. Composites, thermoplastics and thermosetting polymers with constant use temperatures above 135°C. Examples of device types with conjoined or mated surfaces include: forceps, clamps, bending pliers, and cable or plate cutters. Lumen devices include cannulated drill bits, guides, screwdrivers and cannulated screws; dead end lumen (Ø1.13mm x 50mm, Ø2.1mm x 330mm); Open end lumens (Ø0.3048mm x 5.5626mm, Ø0.9mm x 278mm, Ø1.1mm x 285mm, Ø3.65mm x 465mm, Ø4.5mm x 438mm). 0120 Examples  of  intrinsically  stable  metals  include  stainless  steel,  titanium  (CP  and  alloys)  and aluminum. Examples of thermoplastic polymers are PEEK, PEKK, PE I (Ultem), Acetal (Delrin), Radel  (PPSU),  Nylon,  PTFE,  Polypropylene,  ABS  (Acrylonitrile  Butadiene  Styrene)  and  POM (Polyoxymethylene). Examples of thermosetting polymers are Phenolic and Silicone. Examples of composites include carbon fiber reinforced epoxy (CFRE). DePuy Synthes Sterilization Container and Accessory Configurations Supported by Validation Data Modality  Dynamic Air Removal (Pre‐Vacuum) Steam Type of Container  Contents / Configuration  Validation Details Perforated Base Container and Solid Base Container Lifting Platform  Yes Dead end lumen: Ø1.13mm x 50mm  Yes Dead end lumen: Ø2.1mm x 330mm  Y e s Open end lumen: Ø0.3048mm x 5.5626mm  Yes Open end lumen: Ø0.9mm x 278mm Y e s Open end lumen: Ø1.1mm x 285mm  Y e s Open end lumen: Ø3.65mm x 465mm   Yes Open end lumen: Ø4.5mm x 438mm Y e s Mated Surfaces  Yes Materials: Intrinsically stable metals. Composites, thermoplastics and thermosetting polymers with constant use temperatures above 135°C. Yes Filter  62.010.002 Data Card  62.010.005 Tamper Evident Arrow  62.010.004 Maximum Total Weight (Container plus Contents) 25 lbs. Stacking Containers During Sterile Processing Not permitted NOTE: This list refers to parameters of validated devices only. Please refer to the DePuy Synthes Sterilization Container System User Manual for further details on the validated and compatible products. Device Models and Accessories: Container Descriptions and Dimensions Part Number  Description Volume to Vent Ratio (in3/in2) Weight (lbs.) Outer Dimensions (L x W x H), in. Inner Dimensions (L x W x H), in. Perforated Bottom Containers 62.006.001  Full‐One Level, Perforated Base  26  8.5  23.1 x 12.4 x 4. 5  21.0 x 11.4 x 4.2 62.006.002  Full‐Two Level, Perforated Base  31  8.8  23.1 x 12.4 x 5. 3  21.0 x 11.4 x 5.1 62.006.003  Full‐Three Level, Perforated Base  42  9.4  23.1 x 12.4 x 7. 0  21.0 x 11.4 x 6.8 62.009.004  Extended‐Four Level, Perforated Base  56  9.7  25.2 x 12.4 x 8. 5  23.0 x 11.4 x 8.4 62.009.005  Extended‐Five Level, Perforated Base  63  10.3  25.2 x 12.4 x 9. 5  23.0 x 11.4 x 9.4 Solid Bottom Containers 62.016.001  Full‐One Level, Solid Base  52  7.8  23.1 x 12.4 x 4. 5  21.0 x 11.4 x 4.2 62.016.002  Full‐Two Level, Solid Base  62  7.9  23.1 x 12.4 x 5. 3  21.0 x 11.4 x 5.1 62.016.003  Full‐Three Level, Solid Base  83  8.5  23.1 x 12.4 x 7. 0  21.0 x 11.4 x 6.8 62.019.004  Extended‐Four Level, Solid Base  112  9.1  25.2 x 12.4 x 8. 5  23.0 x 11.4 x 8.4 62.019.005  Extended‐Five Level, Solid Base  126  10.0  25.2 x 12.4 x 9. 5  23.0 x 11.4 x 9.4 Lifting Platforms 62.006.010  Lifting Platform for Full Container  N/A  2.6  20.5 x 10.6 x 1.3  N/A 62.009.010  Lifting Platform for Extended Container  N/A  2.9  22.5 x 10.6 x 1.3  N/A Additional Items in DePuy Synthes Sterilization Container System Part Number  Description Consumables 62.010.002  Filters (1,000 pcs) 62.010.004  Tamper Evident Arrows (1,000 pcs) 62.010.005  Data Cards (500 pcs) Replacement Parts Lids 62.006.020  Lid for Full St erilization Container 62.009.021  Lid for Extended S terilization Container Bases 62.006.031  Perforated Base for  Full‐One Level Container 62.006.032  Perforated Base for  Full‐Two Level Container 62.006.033  Perforated Base for  Full‐Three Level Container 62.009.034  Perforated Base for Ex tended‐Four Level Container 62.009.035  Perforated Base for Ex tended‐Five Level Container 62.016.031  Solid Base for Full‐One Level Container 62.016.032  Solid Base for Full‐Two Level Container 62.016.033  Solid Base for Full‐Three Level Container 62.019.034  Solid Base for Extend ed‐Four Level Container 62.019.035  Solid Base for Extend ed‐Five Level Container Filter Retention Plates 62.010.001  Optional Protective Plate 62.010.003  Filter Reten tion Plate, Top 62.010.006  Filter Retenti on Plate, Bottom

See the full product information製品情報をすべて見るには

Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。

Start free 7-day access7日間無料で利用するLog inログイン

OFFICIAL FDA SOURCES

FDA Record and Public Document Status

Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。

Information reviewed:情報の確認日: August 25, 2026