RARA CRAFT DATABASE for FDA Medical Devices
510(k)K190260

FDA DEVICE FACTS

STERIZONE(R) VP4 Sterilizer

Tso3, Inc.

FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。

DECISION DATEJuly 19, 2019PRODUCT CODEPJJ

Indications for use

Full original indications for use

The STERIZONE® VP4 Sterilizer is intended for use in terminal sterilization of cleaned, rinsed, and dried metal and non- metal reusable medical devices in health care facilities.

The single pre-set cycle of the STERIZONE® VP4 Sterilizer uses hydrogen peroxide and ozone. The injection of vaporized hydrogen peroxide is followed by the injection of ozone, which reacts with residual hydrogen peroxide to form hydroxyl radicals.

Sterilization efficacy was demonstrated using a representative sample of one or more device types and packaging, in nine separate validation loads, as described in Table 1 [refer to continuation pages 2 - 4 of this form]. The load to be processed should be maintained between 20°C to 26°C (68°F to 78°F). Total load weight shall not exceed 75 lb, inclusive of the containers/packaging weight but excluding the 25 lb loading rack.

Table 1. Description of the nine validation loads Validation load # Load description Load weight [Excluding the 25 lb loading rack] 1 Validation load #1 consisted of general medical instruments, representing the following geometries:

• Clamp

• Serrated surface

• Box-lock

• Handle

• Button

• Pivot hinge

• Stopcock Type of packaging used: wrapped plastic tray, including silicone mats and brackets, and Pouch General medical instruments were spread out over three trays, six pouches and one wrapped instrument. 11 lb 2 Validation load #2 consisted of general medical instruments, representing the following geometries:

• Gliding mechanism

• Hinges and screws

• Serrated surface

• Luer-lock

• Spring

• Rigid non-lumen scopes Type of packaging used: wrapped plastic and aluminum tray, including silicone mats and brackets, rigid aluminum container and Pouch General medical instruments were spread out over one container, three trays, and six pouches. 20 lb 3 Validation load #3 consisted of three single-channel flexible endoscopes (Ureteroscope) with inside diameter of 1.0 mm and length of 850 mm, packaged individually in wrapped trays or containers, including appropriate silicone brackets or mats. Eight general medical instruments, each packaged in a pouch, were added. 23 lb

Validation load # Load description Load weight [Excluding the 25 lb loading rack] 4 Validation load #4 consisted of up to 15 rigid or semi-rigid channeled instruments in the presence of other packaged medical devices. Three double channel semi-rigid endoscopes (ureteroscope – 0.7 mm × 500 mm and 1.1 mm × 500 mm) were packaged individually in wrapped trays or containers including appropriate silicone brackets or mats. Additional rigid channel instruments or stainless steel rigid lumens were added to each package. Two additional general medical instruments, each packaged in a pouch, were added. 19 lb 5 Validation load #5 consisted in two single channel flexible endoscopes; one Ureteroscope with inside diameter of 1.0 mm and length of 850 mm, and a Bronchoscope with inside diameter of 1.8 mm and length of 830 mm, and one double channel semi- rigid endoscope (ureteroscope – 0.7 mm × 500 mm and 1.1 mm × 500 mm), packaged individually in wrapped trays or containers including appropriate silicone brackets or mats. No additional item was added. 21 lb 6 Validation load #6 consisted of general medical instruments, representing the following geometries:

• Distal end (swivel parts)

• Hinge with screw

• Cannula General medical instruments packaged in one aluminum sterilization container. 9 lb 7 Validation load #7 consisted of general medical instruments, representing the following geometries:

• Box-lock hinge

• Pivot hinge

• Luer-lock General medical instruments, spread out over three aluminum sterilization containers, each weighing 25 lb. 75 lb

Validation load # Load description Load weight [Excluding the 25 lb loading rack] 8 Validation load #8 consisted of two double-channel flexible endoscopes (Ureteroscope) with inside diameter of 1 mm and lengths of 850 and 989 mm; and one single-channel flexible endoscopes (Ureteroscope) with inside diameter of 1 mm and length of 850 mm, packaged individually in wrapped plastic sterilization trays, including appropriate silicone brackets or mats. 16 lb 9 Validation load #9 consisted of one multi-channel flexible endoscope, with no more than 4 channels (Video Colonoscope), with inside diameters of 1.2 mm or more and lengths of 1955 mm or less, or inside diameters of 1.45 mm or more and lengths of 3500 mm or less; packaged in aluminum sterilization container. 17 lb

See the full product information製品情報をすべて見るには

Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。

Start free 7-day access7日間無料で利用するLog inログイン

OFFICIAL FDA SOURCES

FDA Record and Public Document Status

Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。

Information reviewed:情報の確認日: August 25, 2026