FDA DEVICE FACTS
JJ Series Container System
Aesculap, Inc.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
The Aesculap JJ Series Container System is a reusable rigid sterilization container system intended to be used to enclose another medical device that is to be sterilized by a healthcare provider. It is intended to allow sterilization of the enclosed device and also maintain sterility of the enclosed device during transport and until used. This container system is compatible for use in steam sterilization according to the configurations listed in the tables below. The JJ Series Container System consists of two different container styles: a solid bottom container and enhanced drying system (EDS) container. The Aesculap JJ Series Container System includes accessories such as baskets, trays, silicone mats, instrument organizational accessories, holders, indicator cards, tamper evident locks, lid covers, faceplate holders, and tags. The attached tables identifies the load configurations. Table 1. JJ Series Container System Lumen Configurations Sterilization Cycle Size Lumens PreVac Steam with dry time (270°F 4 min Exposure) Full Size 4 stainless steel lumens with > 1mm ID x <500mm L Three- Quarter 4 stainless steel lumens with > 1mm ID x <400mm L Half Size 4 stainless steel lumens with > 1mm ID x <200mm L Prevac Steam without dry time (270°F 3 min Exposure) Non-Porous Full Size Non lumened instruments Three- Quarter Size Non lumened instruments Half Size Non lumened instruments Prevac Steam without dry time (270°F 4 min Exposure) Porous Full Size 4 stainless steel lumens with > 1mm ID x <500mm L Three- Quarter Size 4 stainless steel lumens with > 1mm ID x <400mm L Half Size 4 stainless steel lumens with > 1mm ID x <125mm L Validation testing was performed using the JJ612 single use paper filter. Table 2. JJ Series Container System Configurations, Without Silicone Mat and Lid cover* Container Type Sterilization Method Container Bottom Part # Container Lid Part # Maximum Load Weight (lbs)* Solid Bottom Container Prevac Steam 270°F 4 min exposure 15 minute* dry time JJ140 JJ410 25 JJ130 24 JJ120 23 JJ110 22 JJ340 JJ430 23 JJ330 22 JJ320 20 JJ310 18 JJ240 JJ420 18 JJ230 18 JJ220 15 JJ210 13 EDS Container Prevac Steam 270°F 4 min exposure 8 minute* dry time JJ141 JJ410 25 JJ131 24 JJ121 23 JJ111 22 JJ341 JJ430 23 JJ331 22 JJ321 20 JJ311 18 JJ241 JJ420 18 JJ231 18 JJ221 15 JJ211 13 Solid Bottom Container Prevac Steam Without dry time 270°F 3 min Exposure (Non-porous) AND Prevac Steam Without dry time 270°F 4 min Exposure (Porous) JJ140 JJ410 25 JJ130 JJ120 JJ110 JJ340 JJ430 25 JJ330 JJ320 JJ310 JJ240 JJ420 25 JJ230 JJ220 JJ210 EDS Container Prevac Steam Without dry time 270°F 3 min Exposure (Non-porous) AND Prevac Steam Without dry time 270°F 4 min Exposure (Porous) JJ141 JJ410 25 JJ131 JJ121 JJ111 JJ341 JJ430 25 JJ331 JJ321 JJ311 JJ241 JJ420 25 JJ231 JJ221 JJ211 Table 3. JJ Series Container System Configurations, with Silicone Mat and Lid Cover* Container Type Sterilization Method Container Bottom Part # Container Lid Part # Maximum Load Weight (lbs)* Solid Bottom Container Prevac Steam 270°F 4 min exposure 30 minute* dry time JJ140 JJ410 25 JJ130 24 JJ120 23 JJ110 22 JJ340 JJ430 23 JJ330 22 JJ320 20 JJ310 18 JJ240 JJ420 18 JJ230 18 JJ220 15 JJ210 13 EDS Container Prevac Steam 270°F 4 min exposure 30 minute* dry time JJ141 JJ410 25 JJ131 24 JJ121 23 JJ111 22 JJ341 JJ430 23 JJ331 22 JJ321 20 JJ311 18 JJ241 JJ420 18 JJ231 18 JJ221 15 JJ211 13 Solid Bottom Container Prevac Steam Without dry time 270°F 3 min Exposure (Non-porous) AND Prevac Steam Without dry time 270°F 4 min Exposure (Porous) JJ140 JJ410 25 JJ130 JJ120 JJ110 JJ340 JJ430 25 JJ330 JJ320 JJ310 JJ240 JJ420 25 JJ230 JJ220 JJ210 EDS Container Prevac Steam Without dry time 270°F 3 min Exposure (Non-porous) AND Prevac Steam Without dry time 270°F 4 min Exposure (Porous) JJ141 JJ410 25 JJ131 JJ121 JJ111 JJ341 JJ430 25 JJ331 JJ321 JJ311 JJ241 JJ420 25 JJ231 JJ221 JJ211 *Dry times and load weights are based on container with silicone mats and/or lid cover. Table 4: Sterilization Cycle Compatible Accessories - Prevac Steam Accessories Prevac Steam with dry time Prevac Steam Without dry time Baskets, trays, indicator cards, tamper evident locks, faceplate holders, and tags. Yes Yes Instrument Organization System (Silicone and Stainless Steel racks, brackets, holders, and clamps) Yes Yes Silicone mats Yes 1 Yes Lid Covers Yes 1 Yes 1 Using silicone mats and/or lid covers may require a longer drying time. When used with PreVac Steam with dry time (270°F, 4 minute exposure), the maintenance of sterility of the Aesculap JJ Series Container System is 365 days.
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。