FDA DEVICE FACTS
Biodesign Staple Line Reinforcement
Cook Biotech Incorporated
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
The Biodesign® Staple Line Reinforcement is intended for use as a prosthesis for the surgical repair of soft tissue deficiencies using surgical staplers. The Staple Line Reinforcement may be used for buttressing and reinforcing staple lines during lung resection (e.g., wedge resection, blebectomy, lobectomy, bullectomy, bronchial resection, segmentectomy, pneumonectomy/pneumectomy, pneumoreduction) and other incisions and excisions of the lung and bronchus. The Staple Line Reinforcement can be used for the reinforcement of the gastric staple line during bariatric surgical procedures, and for reinforcement of staple lines during small bowel, mesentery, colon and colorectal procedures. The Staple Line Reinforcement may be used with anastomotic staplers or with non-anastomotic staplers.
Comparison of Technological Characteristics with the Predicate Device: The intended use and mode of action of the Biodesign® Staple Line Reinforcement device is the same as the predicate K170945 device in that they are both intended for use as a prosthesis for the surgical repair of soft tissue deficiencies using surgical sta plers. The porcine Small Intestine Submucosa (SIS) material that functionally buttresses the staple line is identical to that of the predicate. Both devices are single use devices which remodel or are absorbed over time. The technological differences be tween the subject device and the predicate primarily involve the adhesive which is supplied in a ready-to-use formulation that adheres on contact with the surgical stapler. Other changes include design and packaging improvements made possible by this change. Device Comparison Table Device Biodesign® Staple Line Reinforcement (subject device) Biodesign® Staple Line Reinforcement (predicate device) Manufacturer Cook Biotech, Incorporated **unchanged** Cook Biotech, Incorporated 510 (k) Number K201000 K170945 Product Code FTM **unchanged** FTM Materials/ Components SIS buttressing strip **Identical material** SIS buttressing strip Device Biodesign® Staple Line Reinforcement (subject device) Biodesign® Staple Line Reinforcement (predicate device) Pre-coated adhesive (ready-to-use contact adhesive) Pre-coated adhesive (requires activation with water) Center support/carrier (discarded; indirect contact) **identical material** Center support (discarded; indirect contact) Protective adhesive liner (discarded; indirect contact) none Alignment tray (discarded; non-contact) Storage tray (discarded; non-contact) SIS Device Dimensions (unfolded) Length: up to 176 mm Width: up to 12 mm **unchanged** Length: up to 176 mm Width: up to 12 mm Device Thickness (unfolded) Overall device thickness: 0.05mm to 0.6mm (depending on layer count) Overall device thickness: 0.05mm to 0.5mm (depending on layer count) Shelf-Life 6 months 18 months Sterile Barrier Packaging foil pouch foil pouch Humidity control packaging Yes (discarded; non-contact) No Sterilization E-beam process E-beam process One-time Use Yes **unchanged** Yes
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。