FDA DEVICE FACTS
Life Scope PT BSM-1700 Series Bedside Monitor
Nihon Kohden Corporation
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
The Smart Cable NMT Module and Accessories are indicated for monitoring the relaxation of the patient when neuromuscular blockades are administered. The Smart Cable NMT Module and Accessories are comprised of:
• AF-201P NMT Module with Smart Cable
• Disposable Electrodes
• Ma in ca ble
• Holder (optional) The Smart Cable NMT Module and Accessories are intended to be used as a system that requires Nihon Kohden compatible electrodes and bedside monitoring systems. The Smart Cable NMT Module and Accessories are intended for use by medical personnel in clinical settings and are available by prescription only. The Life Scope® BSM-6000 Series Bedside Monitoring Systems are intended to monitor, display, and record physiological data to provide cardiac and vital signs monitoring within a medical facility. The device is intended to produce a visual record of the electrical signals produced by the heart and monitor the electrocardiogram to genera te visible a nd/or a udible alarms when an a rrhythmia exists. The device is also intended to monitor heart rate, pulse rate, blood oxygen saturation (SpO2), non- invasive blood pressure (NIBP), invasive blood pressure (IBP), body temper ature, BIS, cardiac output (CO), oxygen concentration (FiO2), carbon dioxide concentration (CO2), EtCO2, respiratory rate and inspired a nd expired a nesthetic a gents a nd a nesthetic ga ses including N2O , Halothane, Isoflurane, Enflurane, Sevoflur ane and Desflurane. The device may gener ate an audible and/or visual alarm when a measured rate falls outside preset limits. The device may also be used to condition and transmit physiological signals via radio frequency. The device can interface to external equipment to display numerical and waveform data and alarms from the external devices. Supported external devices include CO2 monitors, BIS monitors, Anesthetic agents/gases detection system, Anesthesia machine, Ventilators, CCO monitors, TOF monitors, CCO/SvO2 Monitors, EEG monitoring device, tcPO2/tcPCO2 monitors, rSO2 monitors and external devices which output a nalog voltage signa l. The device will be a vaila ble for use by medical personnel on patients within a medical facility on all pa tient populations. The system requires a BSM-6000 core unit with a compatible input unit: AY Series or Life Scope® PT BSM- 1700 Series. The Life Scope® CSM-1901 Bedside Monitoring Systems are intended to monitor, displa y a nd record physiological data to provide cardiac and vital signs monitoring within a medical facility. The device is intended to produce a visual record of the electrical signal produced by the heart and monitor the electrocardiogram to genera te visible a nd/or a udible alarms when an a rrhythmia exists. The device is also intended to monitor heart rate, pulse rate, blood oxygen saturation (SpO2), non-invasive blood pressure (NIBP), invasive blood pressure (IBP), body temper ature, BIS, cardiac output (CO), oxygen concentration (FiO2), carbon dioxide concentration (CO2), EtCO2, respiratory rate, inspired and expired a nesthetic a gents a nd a nesthetic ga ses including N2O, halothane, isoflurane, enflurane, sevoflurane a nd desflurane. The device also displays patient data from external devices such as ventilators, TOF monitors, CCO/SvO2 monitors, a nd EEG measuring unit. The device may generate a nd audible a nd/or visual a larm when a mea sured ra te falls outside preset limits. The device will be a vaila ble for use by trained medical personnel within a medical fa cility on a ll patient populations, including adult, neonate, infant, child, and adolescent subgroups . The system requires a CSM-1901 core unit with a compatible input unit: AY Series or Life Scope ® PT BSM-1700 Series. AY Series and Accessories are intended to acquire and transfer electrical impulses from the patient to the core uni t of the device. The input unit can acquire the following param eter signals: Electrocardiogram (ECG), Impedance respira tion (Imp Resp), Non-invasive blood pressure (NIBP), Arteria l oxygen sa turation (SpO2), Ca rbon dioxide concentration (CO2), Invasive blood pressure (IBP), Temperature (Temp), Cardiac Output (CO), TOF a nd Bispectral Index (BIS). AA Series sma rt expansion unit a dds additional MULTI sockets to an AY Series input unit and can only be used with compatible monitoring systems. The Data Acquisition Unit (DAU) is an optional accessory. The DAU is used to communicate between the compatible parent core unit and the input unit using connection cables. The keys on the DAU allow operation of the bedside monitor remotely. The DAU is only compatible with the Life Scope® PT BSM-1700 Series and the AY Series Input Units. The Life Scope® PT BSM-1700 Series Beside Monitor and Accessories are intended acquire and transfer electrical impulses from the patient to the main unit of the device. The BSM-1700 Series has both an input and transport/standalone mode. The BSM-1700 Series input unit monitors physiological data and may generate an audible and/or visual alar m when a mea sured ra te falls outside preset limits or when disconnected from the core unit of the device. The input unit can be removed from one core unit a nd connected to a nother device’s core unit. The Life Scope ® PT BSM-1700 Series can be used in transport mode where data is transferred from one device to another device by using with or without WLAN technology. In standalone mode, the device does not require a core unit. The BSM-1700 Series can acquire the following pa rameter signals: Electrocardiogram (ECG), Impedance respira tion (Imp Resp), Non-invas ive blood pressure (NIBP), Arteria l oxygen saturation (SpO2), Carbon dioxide concentration (CO2), Invasive blood pressure (IBP), Temper ature (Temp), Cardiac Output (CO), TOF and Bispectral Index (BIS). When the BSM-1700 Series is used in transport or standalone mode, the following can be analyzed and displayed: Electrocardiogram (ECG), Impedance respir ation (Imp Resp), Non-invas ive blood pressure (NIBP), Arterial oxygen saturation (SpO2), Carbon dioxide concentration (CO2), Invasive blood pressure (IBP), Temperature (Temp), Cardiac Output (CO), and Bispectr al Index (BIS). The Da ta Acquisition Unit (DAU) is an optional accessory. The DAU is used to communicate between the compatible parent core unit and the input unit using connection cables. The keys on the DAU allow operation of the bedside monitor remotely. The DAU is only compatible with the Life Scope ® PT BSM-1700 Series and the AY Series Input Units.
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。