RARA CRAFT DATABASE for FDA Medical Devices
510(k)K221728

FDA DEVICE FACTS

Aviator® Anterior Cervical Plating (ACP) System, LITe® Plate System, DynaTran™ Anterior Cervical Plating (ACP) System, Reflex™ Hybrid ACP System, UniVise™ Spinous Process Fixation Plate

Stryker Corporation

FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。

DECISION DATEOctober 19, 2022PRODUCT CODEKWQ

Indications for use

Aviator® The Aviator® Anterior Cervical Plating System is intended for anterior intervertebral screw fixation of the cervical spine at levels C2-T1. The system is indicated for temporary stabilization of the anterior spine during the development of cervical spine fusions in patients with the following indications:

• Degenerative Disc Disease (as defined by neck pain of discogenic origin with degeneration of the disc confirmed by patient history and radiographic studies)

• Trauma (including fractures)

• Tumors

• Deformities or curvatures (including kyphosis, lordosis, or scoliosis)

• Pseudarthrosis

• Failed previous fusion

• Decompression of the spinal cord following total or partial cervical vertebrectomy

• Spondylolisthesis

• Spinal stenosis LITe® Plate System The LITe® Plate System Universal, Sacral, 2 Screw and 4 Screw Plates are indicated for use via a lateral or anterolateral surgical approach above the bifurcation of the great vessels in the treatment of the thoracic and thoracolumbar (T1-L5) spine or via an anterior approach below the bifurcation of the great vessels in the treatment of lumbar and lumbosacral (L1-S1) spine. The system is intended to provide additional support during fusion in skeletally mature patients in the treatment of the following acute and chronic instabilities or deformities: 510(k) Summary: Stryker Spine Plate Systems

• Degenerative Disc Disease (defined as back pain of discogenic origin with degeneration of the disc confirmed by patient history and radiographic studies);

• Pseudoarthrosis;

• Spondylolysis;

• Spondylolisthesis;

• Spinal stenosis;

• Tumors;

• Trauma (i.e. Fractures or Dislocation)

• Deformities (i.e. Scoliosis, Kyphosis or Lordosis)

• Failed Previous Fusion The LITe® Plate System Buttress Plate is intended to stabilize the allograft or autograft at one level (T1-S1) as an aid to spinal fusion and to provide temporary stabilization and augment development of a solid spinal fusion. It may be used alone or with other anterior, anterolateral, or posterior spinal systems made of compatible materials. This device is not intended for load bearing applications. DynaTran™ The DynaTran™ Anterior Cervical Plating System is intended for anterior intervertebral screw fixation of the cervical spine at levels C2-T1. The system is indicated for temporary stabilization of the anterior spine during the development of cervical spine fusions in patients with the following indications:

• Degenerative Disc Disease (as defined by neck pain of discogenic origin with degeneration of the disc confirmed by patient history and radiographic studies)

• Trauma (including fractures)

• Tumors

• Deformities or curvatures (including kyphosis, lordosis, or scoliosis)

• Pseudarthrosis

• Failed previous fusion

• Decompression of the spinal cord following total or partial cervical vertebrectomy

• Spondylolisthesis

• Spinal stenosis Reflex™ Hybrid The Reflex™ Hybrid ACP System is intended for anterior intervertebral screw fixation of the cervical spine from C2 – T1. These systems are indicated for temporary stabilization of the anterior spine during the development of cervical spine fusions in patients with the following indications:

• Degenerative disc disease (as defined by neck pain of discogenic origin with degeneration of the disc confirmed by patient history and radiographic studies)

• Decompression of the spinal cord following total or partial cervical vertebrectomy 510(k) Summary: Stryker Spine Plate Systems

• Trauma (including fractures)

• Tumors

• Deformities or curvatures (including kyphosis, lordosis or scoliosis)

• Pseudoarthrosis

• Failed previous fusions

• Spondylolisthesis

• Spinal stenosis UniVise™ Spinous Process Fixation Plate The UniVise™ Spinous Process Fixation Plate is a posterior, non-pedicle supplemental fixation device, intended for use at a single level in the non-cervical spine (T1-S1). It is intended for plate fixation/attachment to spinous processes for the purpose of achieving supplemental fusion in the following conditions: degenerative disc disease (defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies); spondylolisthesis; trauma (i.e., fracture or dislocation); and/or tumor. The UniVise™ Spinous Process Fixation Plate is intended for use with bone graft and not intended for stand-alone use.

See the full product information製品情報をすべて見るには

Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。

Start free 7-day access7日間無料で利用するLog inログイン

OFFICIAL FDA SOURCES

FDA Record and Public Document Status

Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。

Information reviewed:情報の確認日: August 22, 2026