FDA DEVICE FACTS
S-Plant Dental Implant System
Newton Implant Systems, Inc.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
Functional and esthetic rehabilitation of the edentulous mandible or maxilla Functional and esthetic rehabilitation of the edentulous mandible or maxilla Functional and esthetic rehabilitation of the edentulous mandible or maxilla Indications The S-Plant Dental Implant System is indicated for surgical placement in the upper and lower jaw arches, to provide a root form means for single or multiple units' prosthetic attachment to restore a patient's chewing function. The smaller S-Plant Dental Implants (Ø3.4, 3.6, 3.8, 4.2, 4.7, 5.2 mm) can be placed with a conventional two stage surgical process with an option for transmucosal healing or they can be placed in a single stage surgical process for immediate loading when good primary stability is achieved with appropriate occlusal loading. The larger S-Plant Dental Implants (Ø6.0, 7.0 mm) can be placed with a conventional two stage surgical process with an option for transmucosal healing and are indicated for the molar region with delayed loading. The DIO UF HSA Internal Sub-Merged Implant Systems indicated for surgical placement in the upper and lower jaw arches, to provide a root form means for single or multiple units' prosthetic attachment to restore a patient's chewing function. The smaller The DIO UF HSA Internal Sub-Merged (Ø3.8 ~ Ø5.5) implants can be placed with a conventional two stage surgical process with an option for transmucosal healing or they can be placed in a single stage surgical process for immediate loading when good primary stability is achieved with appropriate occlusal loading. The larger (Ø6.0 ~ Ø7.0) implants can be placed with a conventional two stage surgical process with an option for transmucosal healing and are indicated for the molar region with delayed loading. The UF(II) Narrow Implant System is intended for two-stage surgical procedures in the following situations and with the following clinical protocols:
- The intended use for the 3.0mm, 3.3mm diameter UF(II) Narrow Implant is limited to the replacement of maxillary lateral incisors and mandibular incisors.
- Immediate placement in extraction sites and in situations with a partially or completely healed alveolar ridge.
- It is intended for delayed loading. Prosthetic Interface Connection Tapered conical hex Tapered conical hex Tapered conical hex Fixture Diameter and Length Diameters 3.4 mm; 3.6 mm Each in lengths of 8.5, 10.0, 11.5, 13.0, 15.0 mm Diameter 3.8 mm In lengths of 7.0, 8.5, 10.0, 11.5, 13.0, 15.0 mm Diameters 4.2 mm; 4.7 mm; Each in lengths of 7.0, 8.5, 10.0, 11.5, 13.0 mm Diameter 5.2 mm; 6.0 mm; Each in lengths of 7.0, 8.5, 10.0, 11.5 mm Diameter 7.0 mm in lengths of 7.0, 8.5 mm Fixture Diameter: 3.8, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0 Fixture Length: 7.0, 8.5, 10, 11.5, 13.0, 15.0, 16.0 Extra wide (6.0, 6.5, 7.0) implant bodies are only available in lengths from 7mm to 14.5mm Fixture Diameter: 3.0, 3.3 Fixture Length: 8.5, 10, 11.5, 13.0, 15.0 Implant Material CP Ti Grade 4 (ASTM F67) CP Ti Grade 4 (ASTM F67) CP Ti Grade 4 (ASTM F67) Implant Endosseous Surface S.L.A. S.L.A. S.L.A. Implant Placement Bone Level Bone Level Bone Level Sterilization Gamma Sterilization Gamma Sterilization Gamma Sterilization
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。