FDA DEVICE FACTS
Temporis, Irix Plus
Dws S.R.L.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
Temporis and Irix Plus are light-curing 3D-printing materials intended for fabricating indirect restorative for both anterior and posterior restorations, such as inlays, onlays, veneers, anterior or posterior crowns and bridges. Temporis is used for fabricating temporary dental restorations, Irix Plus is used for fabricating permanent dental restorations. TECHNOLOGICAL CHARACTERISTICS AND SUBSTANTIAL EQUIVALENCE: The side-by-side comparison between the subject and the predicate device shows that the devices have the same indications for use and are substantially equivalent in material composition and technological characteristics. The results of the tests performed show that the subject device meets the requirements mentioned in the applicable standards and confirm that the device performs similarly to predicate. Any differences between subject device and the predicate device are minimal and present no new risks. The noted differences, in comparison to the predicate device, raise no new questions of safety and effectiveness. Feature TEMPORIS – IRIX PLUS (Submitted Product) PREDICATE DEVICE CONCLUSION K number K231142 K202846 Trade Name Temporis, Irix Plus TERA HARZ Manufacturer D.W.S. S.r.l. Graphy Inc. Regulation Number 21 CFR 872.3690 21 CFR 872.3690 same Regulation Name Tooth Shade Resin Material Tooth Shade Resin Material same Regulatory Class Class II Class II same Product code EBF, EBG EBF, EBG same Indications For Use/Intended Use Temporis and Irix Plus are light-curing 3D-printing materials intended for fabricating for both anterior and posterior restorations, such as inlays, onlays, veneers, anterior or posterior crowns and bridges. Temporis is used for fabricating temporary dental restorations, Irix Plus is intended used for fabricating permanent dental restorations. TERA HARZ is indicated as an indirect restorative for both anterior and posterior restorations, including occlusal surfaces. The TERA HARZ material is used for fabricating temporary or permanent restorations such as crowns and bridges, inlays, onlays, veneers and full crown restorations. Fabrication of TERA HARZ requires a computer-aided and manufacturing (CAD/CAM) system that includes the following: scanner, design software, additive printer, and post-cure unit. same Both the subject and predicate device are light-curing 3D-printing materials intended for the manufacturing of temporary or permanent anterior and posterior restorations Intended Users dentist or dental technician dentist or dental technician same Material Methacrylate-based resins. Methacrylate-based resins. substantially equivalent Material Shades Similar to Common VITA-shades Common VITA-shades substantially equivalent Product State Liquid Liquid same Manufacturing Technology 3D liquid (light-cured) print resin for dental 3D liquid (light-cured) print resin for dental same DWS s.r.l. Temporis – Irix Plus Page 3 Feature TEMPORIS – IRIX PLUS (Submitted Product) PREDICATE DEVICE CONCLUSION Sterility Nonsterile Nonsterile same Shelf Life 3 years 1 year Different, however the results of the tests carried on the proposed device showed that the performance of the device after aging met the pre-determined acceptance criteria. Therefore, this difference will not raise new question on the safety and effectiveness of the proposed device. Performance Testing Performed tests according to ISO 4049:2019, Dentistry – Polymer-based restorative materials ISO 10477:2020, Dentistry –Polymer-based crown and veneering materials. Performed tests according to ISO 4049:2013, Dentistry – Polymer-based restorative materials ISO 10477:2018, Dentistry – Polymer-based crown and veneering materials. substantially equivalent The bench testing conducted on the subject device confirm that the minor differences in materials and technological characteristics do not affect the safety or effectiveness of the device and demonstrate that the subject device is substantially equivalent to the predicate device. No issues of safety or effectiveness arise. Biocompatibility Meet requirements for ISO 10993-1 Meet requirements for ISO 10993-1 substantially equivalent OTC or Rx Rx Rx same The subject and predicate device share the same indications for use, they are both light-curing 3D-printing materials indicated as indirect restorative for anterior and posterior restorations. The predicate device can be used for both temporary and permanent restorations just as the proposed resins Temporis and Irix Plus. The materials used for the subject device are the same or similar to those used for the predicate device. Both the devices are methacrylate-based resins for 3D printing to be used to create a customized dental restoration. Methacrylate based resins are well known materials, commonly used in the dental industry for temporary and permanent dental restorations. The biocompatibility and performance testing show that slight differences in material composition do not raise any questions of safety or effectiveness; the subject device has demonstrated suitability for intended use through material non-clinical performance testing. The proposed and predicate device are liquid photopolymers that are subjected to solidification by laser induced polymerization. Fabrication of the dental restorations requires for both the subject and the predicate device a computer-aided and manufacturing (CAD/CAM) system that includes the following: scanner, design software, additive printer, and post-cure unit. The subject device has similar physical properties as the predicate device. The difference in the proposed shelf life will not raise new question on the new safety and effectiveness of the subject device as shown by the results of the stability testing performed. DWS s.r.l. Temporis – Irix Plus Page 4
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。