FDA DEVICE FACTS
LW Pre-milled Abutment
Ossvis Co., Ltd.
FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。
Indications for use
Statement LW Pre-milled Abutment is intended for use with dental implants as a support for single or multiple tooth prostheses in the maxilla or mandible of a partially or fully edentulous patient. Compatible Implant Implant Diameter (mm) Platform Diameter (mm) LW Implant Ø4.2/4.55/ 4.6/5.0/5.05/ 5.07/5.4/5.45 /5.9/5.95/6.55 /6.6/6.8/6.85/ 7.25/7.3/7.35 /7.75/7.8/7.85 Ø4.2/4.55/ 4.6/5.0/5.05/ 5.07/5.4/5.45 /5.9/5.95/6.55 /6.6/6.8/6.85/ 7.25/7.3/7.35 /7.75/7.8/7.85 LW Narrow Implant Ø3.75/3.77 Ø3.75/3.77 LW Pre-milled Abutment is intended for use the LW Implant System in the chart. All digitally designed abutments for use with LW Pre-milled Abutment are intended to be manufactured at the OSSVIS-validated milling center. s-Clean Pre-Milled Abutment is intended for use with dental implants as a support for single or multiple tooth prostheses in the maxilla or mandible of a partially or fully edentulous patient. Implant System Compatibility Implant Diameter (mm) Platform Diameter (mm) s-Clean SQ-SL Fixture Ø5.8 Ø4.3 Ø6.8 Ø4.5 s-Clean Pre-Milled Abutment is intended for use with the s-Clean SQ-SL Fixtures in the chart. All digitally designed abutments for use with s-Clean Pre-Milled Abutment are intended to be manufactured at a Dentis validated milling center. Premilled Titanium Block System is intended for use with dental implants as a support for single or multiple tooth prostheses in the maxilla or mandible of a partially or fully edentulous patient. Implant System Compatibility Implant Diameter (mm) Platform Diameter (mm) IBS Implant System 3.8/4.3/4.8/ 5.3/5.8/6.3 3.8/4.3/4.8/ 5.3/5.8/6.3 IBS Implant System 3.5/4.0/4.5/ 5.0/5.5/6.0/6.5 3.5/4.0/4.5/ 5.0/5.5/6.0/6.5 Magicore System 4.0/4.5/5.0/ 5.5/6.0/6.5 4.0/4.5/5.0/ 5.5/6.0/6.5 IBS Implant System II 3.5/3.8/4.0/4.5/ 5.0/5.5/6.0/6.5 3.5/3.8/4.0/4.5/ 5.0/5.5/6.0/6.5 Premilled Titanium Block System is intended for use with the IBS implant system, Magicore System and IBS Implant System II in the chart. All digitally designed abutments for use with Premilled Titanium Block System are intended to be manufactured at a Innobiosurg validated milling center. Gingival Height (mm) Min 1.0 / Max 7.0 (Patient-specific milling design envelope) Not identified (Patient-specific milling design envelope) Min 0.5 / Max 7.0 (Patient-specific milling design envelope) Post Height (mm) Min 4.0 (Patient-specific milling design envelope) Not identified (Patient-specific milling design envelope) Min 4.0 (Patient-specific milling design envelope) Connection Type Hex, Non-Hex Hex, Non-Hex Hex, Non-Hex Type of Retention Screw-retained or cement retained Screw-retained or cement retained Screw-retained or cement retained Anatomical Site Oral Cavity Oral Cavity Oral Cavity Material Ti 6Al 4V ELI (ASTM F136) Ti 6Al 4V ELI (ASTM F136) Ti 6Al 4V ELI (ASTM F136) Surface treatment N/A N/A N/A Sterilization End User Sterilization End User Sterilization End User Sterilization
Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。
OFFICIAL FDA SOURCES
FDA Record and Public Document Status
Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。