RARA CRAFT DATABASE for FDA Medical Devices
510(k)K252854

FDA DEVICE FACTS

SteriTite Container System with MediTray Products

Case Medical, Inc.

FDA-sourced product information for medical-device development research. Use the official FDA sources at the end of this page when the original public document wording is needed.医療機器開発の調査用に、FDA の公開情報から取った製品情報を示しています。公開文書の原文が必要なときは、このページの最後にある FDA の公式な出典をご覧ください。

DECISION DATEJune 3, 2026PRODUCT CODEKCTCLINICAL AREAPatient Monitoring

Indications for use

The SteriTite container and MediTray products are a reusable sterilization container system to be used to enclose other medical devices, which are to be sterilized, transported, and stored by a health care provider. It is intended to allow sterilization of the enclosed devices and maintain sterility of the enclosed devices until it is used. The perforated bottom container configuration is compatible for use with the following steam sterilization cycles: Steam Cycle with Steam Flush Pressure Pulses (SFPP):

• At 132°C for 4 minutes with a 30-minute dry time

• At 135°C for 3 minutes with a 30-minute dry time Note: The validation studies were performed using a 4 SFPP cycle with a validation load consisting of unwrapped metal items with a total weight of 25 lbs. (including the SteriTite container). In addition, the SteriTite container, also available with a solid bottom, is compatible with low-temperature sterilizers, and is compatible with the following sterilizers and cycles identified below:

• SteriTite solid bottom Container: STERRAD 100NX - Express Cycle (surface sterilization of medical devices only; no lumens). Note: The validation studies were performed using a validation load consisting of a da Vinci X/Xi 8mm Endoscope with a total weight of 22.4 lbs. (including the SteriTite container).

• SteriTite solid bottom Container: STERRAD 100NX - DUO Cycle (surface sterilization of medical devices only; no lumens). Note: The validation studies were performed using a validation load consisting of non-lumened devices with a total weight of 13.2 lbs. (including the SteriTite container). Refer to the specific Sterilizer user manual for information regarding the processing of appropriate devices and device types. See labeling for tables of compatible devices and maximum load weight recommendations including the weight of the sterilization container. The following tables (Table 1 and Table 2) display the SteriTite part numbers and the sterilizers they are compatible with: Table 1. SteriTite Perforated Bottom Container Compatibility with SFPP and Pre vacuum Steam Sterilizers. Part Number | Description | SFPP | Gravity Steam SC02MG | 2-inch High Mini-Size w/ Perforated Base | Yes | Yes SC03MG | 3-inch High Mini-Size w/ Perforated Base | Yes | Yes SC04MG | 4-inch High Mini-Size w/ Perforated Base | Yes | Yes SC02NG | 2-inch High Narrow-Size w/ Perforated Base | Yes | Yes SC03NG | 3-inch High Narrow-Size w/ Perforated Base | Yes | Yes SC03NLG | 3-inch High Narrow Long-Size w/ Perforated Base | N/A | Yes SC04NLG | 4-inch High Narrow Long-Size w/ Perforated Base | N/A | Yes SC05NLG | 5-inch High Narrow Long-Size w/ Perforated Base | N/A | Yes SC04HG | 4-inch High Half-Size w/ Perforated Base | Yes | Yes SC05HG | 5-inch High Half-size w/ Perforated Base | Yes | Yes SC06HG | 6-inch High Half-Size w/ Perforated Base | Yes | Yes SC08HG | 8-inch High Half-Size w/ Perforated Base | N/A | Yes SC04QG | 4-inch High 3/4 Size w/ Perforated Base | Yes | Yes SC05QG | 5-inch High 3/4 Size w/ Perforated Base | Yes | Yes SC06QG | 6-inch High 3/4 Size w/ Perforated Base | Yes | Yes SC08QG | 8-inch High 3/4 Size w/ Perforated Base | N/A | Yes SC04FG | 4-inch High Full-size w/ Perforated Base | Yes | Yes SC05FG | 5-inch High Full-size w/ Perforated Base | Yes | Yes SC06FG | 6-inch High Full-size w/ Perforated Base | Yes | Yes SC08FG | 8-inch High Full-size w/ Perforated Base | N/A | Yes SC04LG | 4-inch High Long-size w/ Perforated Base | N/A | Yes SC06LG | 6-inch High Long-size w/ Perforated Base | N/A | Yes SC08LG | 8-inch High Long-size w/ Perforated Base | N/A | Yes SC05WG | 5-inch High Wide Size w/ Perforated Base | N/A | Yes Note: Perforated bottom containers with part numbers with suffix (G) may be used in any sterilization modality. SteriTite containers with solid bottom may be used in pre-vacuum steam sterilization as well as low temperature modalities. N/A notes that the specified container does not fit into the sterilizer chamber because of length or width. Table 2. SteriTite Solid Bottom Container Compatibility with STERRAD 100NX and Steris V-Pro sterilizers Part Number | Description | STERRAD 100NX | V-Pro s2/60 | V-Pro maX/maX2 SC02M | 2-inch High Mini-Size w/ Solid Base | Yes | Yes | Yes SC03M | 3-inch High Mini-Size w/ Solid Base | Yes | Yes | Yes SC04M | 4-inch High Mini-Size w/ Solid Base | Yes | Yes | Yes SC02N | 2-inch High Narrow-Size w/ Solid Base | Yes | Yes | Yes SC03N | 3-inch High Narrow-Size w/ Solid Base | Yes | Yes | Yes SC03NL | 3-inch High Narrow Long-Size w/ Solid Base | Yes | Yes | Yes SC04NL | 4-inch High Narrow Long-Size w/ Solid Base | Yes | Yes | Yes SC05NL | 5-inch High Narrow Long-Size w/ Solid Base | Yes | Yes | Yes SC04H | 4-inch High Half-Size w/ Solid Base | Yes | Yes | Yes SC05H | 5-inch High Half-size w/ Solid Base | Yes | Yes | Yes SC06H | 6-inch High Half-Size w/ Solid Base | Yes | Yes | Yes SC08H | 8-inch High Half-Size w/ Solid Base | Yes | Yes | Yes SC04Q | 4-inch High 3/4 Size w/ Solid Base | Yes | Yes | Yes SC05Q | 5-inch High 3/4 Size w/ Solid Base | Yes | Yes | Yes SC06Q | 6-inch High 3/4 Size w/ Solid Base | Yes | Yes | Yes SC08Q | 8-inch High 3/4 Size w/ Solid Base | Yes | Yes | Yes SC04F | 4-inch High Full-size w/ Solid Base | Yes | Yes | Yes SC05F | 5-inch High Full-size w/ Solid Base | Yes | Yes | Yes SC06F | 6-inch High Full-size w/ Solid Base | Yes | Yes | Yes SC08F | 8-inch High Full-size w/ Solid Base | Yes | Yes | Yes SC04L | 4-inch High Long-size w/ Solid Base | Yes | N/A | Yes SC06L | 6-inch High Long-size w/ Solid Base | Yes | N/A | Yes SC08L | 8-inch High Long-size w/ Solid Base | Yes | N/A | Yes SC05W | 5-inch High Wide Size w/ Solid Base | Yes | N/A | Yes Note: Perforated bottom containers with part numbers with suffix (G) may be used in any sterilization modality. SteriTite containers with solid bottom may be used in pre-vacuum steam sterilization as well as low temperature modalities such as EtO, V-Pro, and in STERRAD sterilizers for surface sterilization have no G as a suffix in the part number. N/A notates that the specified container does not fit into the sterilizer chamber because of length or width. Table 3. SteriTite Container maximum load weight in Steam Sterilization Part Number | Total Load Weight in Pre-Vacuum Cycle | Total Load Weight in Gravity Cycle | Total Load Weight in SFPP SC02M(G) | 35lbs | 35lbs | 25lbs SC03M(G) | 35lbs | 35lbs | 25lbs SC04M(G) | 35lbs | 35lbs | 25lbs SC02N(G) | 35lbs | 35lbs | 25lbs SC03N(G) | 35lbs | 35lbs | 25lbs SC03NL(G) | 35lbs | 35lbs | N/A SC04NL(G) | 35lbs | 35lbs | N/A SC05NL(G) | 35lbs | 35lbs | N/A SC04H(G) | 35lbs | 35lbs | 25lbs SC05H(G) | 35lbs | 35lbs | 25lbs SC06H(G) | 35lbs | 35lbs | 25lbs SC08H(G) | 35lbs | 35lbs | N/A SC04Q(G) | 35lbs | 35lbs | 25lbs SC05Q(G) | 35lbs | 35lbs | 25lbs SC06Q(G) | 35lbs | 35lbs | 25lbs SC08Q(G) | 35lbs | 35lbs | N/A SC04F(G) | 35lbs | 35lbs | 25lbs SC05F(G) | 35lbs | 35lbs | 25lbs SC06F(G) | 35lbs | 35lbs | 25lbs SC08F(G) | 35lbs | 35lbs | N/A SC04L(G) | 35lbs | 35lbs | N/A SC06L(G) | 35lbs | 35lbs | N/A SC08L(G) | 35lbs | 35lbs | N/A SC05W(G) | 35lbs | 35lbs | N/A N/A notes that the specified container does not fit into the sterilizer chamber because of length or width. Table 4. SteriTite Container in 100NX Maximum Load Weight Part Number | Total Load Weight in 100NX Standard Cycle | Total Load Weight in 100NX DUO Cycle | Total Load Weight in 100NX Flexible Cycle | Total Load Weight in 100NX Express Cycle SC02M(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC03M(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04M(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC02N(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC03N(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC03NL(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04NL(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC05NL(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04H(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC05H(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC06H(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC08H(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04Q(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC05Q(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC06Q(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC08Q(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04F(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC05F(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC06F(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC08F(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC04L(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC06L(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC08L(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs SC05W(G) | 21.4 lbs | 13.2 lbs | 21.4 lbs | 22.4 lbs Note: For Surface sterilization solid-bottom containers can be used. 22.4 lbs per shelf, where applicable. A solid-bottom container can be used in the Express, and DUO cycles for surface sterilization only. For the sterilization of lumened devices, SteriTite perforated bottom container suffix G must be used.

See the full product information製品情報をすべて見るには

Device description, AI/software, PCCP, evaluation and limitations are available with an account: seven days of full access after free registration, then with the paid plan.機器の説明、AI・ソフトウェア、PCCP、評価、制限事項は、アカウントでご覧いただけます。無料登録から 7 日間はすべて利用でき、その後は有料プランでご利用いただけます。

Start free 7-day access7日間無料で利用するLog inログイン

OFFICIAL FDA SOURCES

FDA Record and Public Document Status

Record and document link states are stored separately.FDA Record と公開文書のリンクの状態は、別々に記録しています。

Information reviewed:情報の確認日: July 28, 2026